This stylish design five input HDMI selector routes high definition video and audio signals from the selected input to the HDMI output.  The switcher is fully HDCP compliant and comes with an infrared remote control.  It has a gain control to compensate for long cable runs.  Includes mains adaptor.

Specifications:
• Inputs: 5 x HDMI
• Fully HDMI and HDCP compliant
• Size 155(W) x 70(D) x 23(H)mm

This versatile HDMI switcher allows you to expand your HDTV system and connect multiple devices such as game consoles or DVD players to a single HDMI input.  With inbuilt HDCP control to minimize switching delay you can rapidly change between the four input signals using the remote control.  Separate audio outputs allow you to connect a surround sound amplifier without HDMI while an Audio Return Channel (ARC) decoder enables digital audio output when the television is displaying an internal DVB-T or PVR signal.  To complete the unit there is also a HDMI Ethernet connection allowing you to share the network from the HDMI signal to a Media Centre or PVR without the use of an Ethernet switch.

Specifications:
• HDMI 1.4a Compliant
• Supports 3D, HEAC, and CEC
• 4 x HDMI Inputs
• 1 x HDMI Output
• Ethernet Port
• Digital Audio Output: Optical or Coaxial
• Analogue Audio Output: 3.5mm Stereo
• Dimensions: 154(W) x 70(D) x 25(H)mm

A splitter allows one HDMI output device to be distributed to up to four monitors or projectors without any loss of signal.  Ideal for conferences, conventions, presentations or very large home theatre installations.

Specifications:
• Simultaneous display
• Supports 480p, 720p, 1080i, 1080p
• HDCP compliant
• HDMI 1.2a compliant
• Dimensions: 270(L) x 182(W) x 40(H)mm

Share four HDMI sources between two high definition TVs (HDTV).  Essentially, you are able to use all of your high definition sources like Blu-ray, PS3, HD set top boxes and etc in your main living room entertainment centre to another HD display in a separate location or room.  Thus saving you thousands from purchasing HD players all over again!  It also reduces cable clutter as well as the hassles of disconnecting and reconnecting sources to a TV with only one or two HDMI inputs.  Switch easily between any four HDMI sources with the IR remote included, with up to 16 combinations. Mains plugpack included.

Specifications:
• Supports HDMI 1.3b
• Supports HDTV 1080p
• Video amplifier bandwidth 2.25Gbps/225MHz

Play your Blu-Ray or HD movies to more than one HDTV.  Use this HDMI amplifier splitter to convert a single HDMI input signal into two identical and simultaneous output signals, all without losing high definition video and audio quality.

Specifications:
• Supports HDMI 1.3b
• Up to 2.25Gbps/225MHz
• Dimensions: 155(L) x 70(W) x 23(H)mm

Transmit real time 1080p HDMI signal without any video loss or compression to a flat panel TV in another room.  It uses the WHDI® standard for transmitting uncompressed HDMI signals wirelessly to a receiver in any room up to 25m away.  The unit is able to transmit to up to four receivers, however will only display to one receiver at any given time.  An IR receiver can be plugged into the sender unit so you can use any remote control to operate the source from the receiving end.  Setup is truly plug and play, you will be up and running in a matter of minutes.

Specifications:
• Operating frequency: 5.8GHz
• Video input resolution: 1080p, 1080i, 720p, 576p, 576i, 480i
• Audio format support: Up to 10Mbps, up to 192kHz x 24bit AC-3 and DTS
• Infra-red Carrier Frequency: 38kHz
• IR Frequency: 38kHz
• Data transmission rate: 3Gbps
• RF Power: 38kHz
• Latency: < 1ms
• Power consumption: 6-7W
• Receiver/Sender dimensions: 154(H) x 92(W) x 20(D)mm

Add-ons available separately:
Extra 5.8GHz HDMI Receiver for AR1877
4 Input HDMI Switcher for AR1877

Extra receiver for AR1877.

To be coupled with the 5.8GHz Wireless HDMI Sender/Receiver (AR1877) to allow up to 4 HDMI sources to be connected to the wireless transmitter and switched between.  It docks horizontally onto the transmitter and is powered directly from it.  Also supplied with 4 infra-red emitters to control up to 4 HDMI devices.

• Dimensions: 154(H) x 55(W) x 20(D) mm

A HDMI 1.3 over Cat 5 Extender boosts your video/audio transmission distance up to 60m (200ft) in HDTV 720p / 1080i format.  With two low cost Cat 5/5e/6 cables, you can extend HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and any other TMDS compliant source to distant display monitors including HDMI enabled TV sets, LCD PC monitors or projectors.  With the embedded IR receiving and emitting units you an enjoy high quality audio/video and control the HDMI sources from a remote site instantly.

Features:
• HDMI 1.3c compliant
• Extends the transmission distance up to 60m from the sources under 1080i or 720p
• Extends the transmission distance up to 40m from the sources under 1080p
• Provides independent DDC channel, fully HDCP compliant
• Minimises the cable skew by adjustable 8-level equalization control
• Embedded IR control path

Specifications:
• Video bandwidth :Single-link 225Hz (10.2Gbps)
• Video support: 480i / 480p / 720p / 1080i / 1080p
• Transmission: Full HD (1080p): 40m (130ft) CAT5e/ 50m (165ft) – CAT6
• HD (720p/1080i): 50m (165ft) – CAT5e / 60m (200ft) – CAT6
• Audio support: Surround sound (up to 7.1ch) or stereo digital audio
• Equalisation: 8-level digital on RX
• Input: 1x HDMI, 2x RJ-45, 1x 3.5mm
• Output: 2 x RJ-45, 1 x 3.5mm, 1 x HDMI
• Carrier frequency: 38kHz
• Power supply: 5VDC @ 4A
• Dimensions: 80(L) x 60(W) x 25(H)mm